1. Which IPsec protocol should be selected when confidentiality is required?
tunnel mode
transport mode
authentication header
encapsulating security payload
generic routing encapsulation
transport mode
authentication header
encapsulating security payload
generic routing encapsulation
2. When using ESP tunnel mode, which portion of the packet is not authenticated?
ESP header
ESP trailer
new IP header
original IP header.
ESP header
ESP trailer
new IP header
original IP header.
3. When configuring an IPsec VPN, what is used to define the traffic that is sent through the IPsec tunnel and protected by the IPsec process?
crypto map
crypto ACL
ISAKMP policy
IPsec transform set.
crypto map
crypto ACL
ISAKMP policy
IPsec transform set.
4.
Refer to the exhibit. Which two IPsec framework components are valid options when configuring an IPsec VPN on a Cisco ISR router? (Choose two.)
Integrity options include MD5 and RSA.
IPsec protocol options include GRE and AH.
Confidentiality options include DES, 3DES, and AES.
Authentication options include pre-shared key and SHA.
Diffie-Hellman options include DH1, DH2, and DH5..
Refer to the exhibit. Which two IPsec framework components are valid options when configuring an IPsec VPN on a Cisco ISR router? (Choose two.)
Integrity options include MD5 and RSA.
IPsec protocol options include GRE and AH.
Confidentiality options include DES, 3DES, and AES.
Authentication options include pre-shared key and SHA.
Diffie-Hellman options include DH1, DH2, and DH5..
5.
Refer to the exhibit. Based on the SDM screen, which Easy VPN Server component is being configured?
group policy
transform set
IKE proposal
user authentication.
Refer to the exhibit. Based on the SDM screen, which Easy VPN Server component is being configured?
group policy
transform set
IKE proposal
user authentication.
6.
Refer to the exhibit. Under the ACL Editor, which option is used to specify the traffic to be encrypted on a secure connection?
Access Rules
IPsec Rules
Firewall Rules
SDM Default Rules.
Refer to the exhibit. Under the ACL Editor, which option is used to specify the traffic to be encrypted on a secure connection?
Access Rules
IPsec Rules
Firewall Rules
SDM Default Rules.
7. What are two authentication methods that can be configured using the SDM Site-to-Site VPN Wizard?
(Choose two.)
MD5
SHA
pre-shared keys
encrypted nonces
digital certificates.
(Choose two.)
MD5
SHA
pre-shared keys
encrypted nonces
digital certificates.
8.
Refer to the exhibit. A site-to-site VPN is required from R1 to R3. The administrator is using the SDM Site-to-Site VPN Wizard on R1. Which IP address should the administrator enter in the highlighted field?
10.1.1.1
10.1.1.2
10.2.2.1
10.2.2.2
192.168.1.1
192.168.3.1.
Refer to the exhibit. A site-to-site VPN is required from R1 to R3. The administrator is using the SDM Site-to-Site VPN Wizard on R1. Which IP address should the administrator enter in the highlighted field?
10.1.1.1
10.1.1.2
10.2.2.1
10.2.2.2
192.168.1.1
192.168.3.1.
9. What is required for a host to use an SSL VPN?
VPN client software must be installed.
A site-to-site VPN must be preconfigured.
The host must be in a stationary location.
A web browser must be installed on the host.
VPN client software must be installed.
A site-to-site VPN must be preconfigured.
The host must be in a stationary location.
A web browser must be installed on the host.
10. Which two statements accurately describe characteristics of IPsec? (Choose two.)
IPsec works at the application layer and protects all application data.
IPsec works at the transport layer and protects data at the network layer.
IPsec works at the network layer and operates over all Layer 2 protocols.
IPsec is a framework of proprietary standards that depend on Cisco specific algorithms.
IPsec is a framework of standards developed by Cisco that relies on OSI algorithms.
IPsec is a framework of open standards that relies on existing algorithms..
IPsec works at the application layer and protects all application data.
IPsec works at the transport layer and protects data at the network layer.
IPsec works at the network layer and operates over all Layer 2 protocols.
IPsec is a framework of proprietary standards that depend on Cisco specific algorithms.
IPsec is a framework of standards developed by Cisco that relies on OSI algorithms.
IPsec is a framework of open standards that relies on existing algorithms..
11. When configuring a site-to-site IPsec VPN using the CLI, the authentication pre-share command is configured in the ISAKMP policy. Which additional peer authentication configuration is required?
Configure the message encryption algorithm with the encryptiontype ISAKMP policy configuration command.
Configure the DH group identifier with the groupnumber ISAKMP policy configuration command.
Configure a hostname with the crypto isakmp identity hostname global configuration command.
Configure a PSK with the crypto isakmp key global configuration command..
Configure the message encryption algorithm with the encryptiontype ISAKMP policy configuration command.
Configure the DH group identifier with the groupnumber ISAKMP policy configuration command.
Configure a hostname with the crypto isakmp identity hostname global configuration command.
Configure a PSK with the crypto isakmp key global configuration command..
12. Which action do IPsec peers take during the IKE Phase 2 exchange?
exchange of DH keys
negotiation of IPsec policy
verification of peer identity
negotiation of IKE policy sets.
exchange of DH keys
negotiation of IPsec policy
verification of peer identity
negotiation of IKE policy sets.
13.
Refer to the exhibit. A network administrator is troubleshooting a GRE VPN tunnel between R1 and R2. Assuming the R2 GRE configuration is correct and based on the running configuration of R1, what must the administrator do to fix the problem?
change the tunnel source interface to Fa0/0
change the tunnel destination to 192.168.5.1
change the tunnel IP address to 192.168.3.1
change the tunnel destination to 209.165.200.225
change the tunnel IP address to 209.165.201.1.
Refer to the exhibit. A network administrator is troubleshooting a GRE VPN tunnel between R1 and R2. Assuming the R2 GRE configuration is correct and based on the running configuration of R1, what must the administrator do to fix the problem?
change the tunnel source interface to Fa0/0
change the tunnel destination to 192.168.5.1
change the tunnel IP address to 192.168.3.1
change the tunnel destination to 209.165.200.225
change the tunnel IP address to 209.165.201.1.
14. When verifying IPsec configurations, which show command displays the encryption algorithm, hash algorithm, authentication method, and Diffie-Hellman group configured, as well as default settings?
show crypto map
show crypto ipsec sa
show crypto isakmp policy
show crypto ipsec transform-set.
show crypto map
show crypto ipsec sa
show crypto isakmp policy
show crypto ipsec transform-set.
15. With the Cisco Easy VPN feature, which process ensures that a static route is created on the Cisco Easy VPN Server for the internal IP address of each VPN client?
Cisco Express Forwarding
Network Access Control
On-Demand Routing
Reverse Path Forwarding
Reverse Route Injection.
Cisco Express Forwarding
Network Access Control
On-Demand Routing
Reverse Path Forwarding
Reverse Route Injection.
16. Which statement describes an important characteristic of a site-to-site VPN?
It must be statically set up.
It is ideally suited for use by mobile workers.
It requires using a VPN client on the host PC.
It is commonly implemented over dialup and cable modem networks.
After the initial connection is established, it can dynamically change connection information..
It must be statically set up.
It is ideally suited for use by mobile workers.
It requires using a VPN client on the host PC.
It is commonly implemented over dialup and cable modem networks.
After the initial connection is established, it can dynamically change connection information..
17. What is the default IKE policy value for authentication?
MD5
SHA
RSA signatures
pre-shared keys
RSA encrypted sconces.
MD5
SHA
RSA signatures
pre-shared keys
RSA encrypted sconces.
18. Which requirement necessitates using the Step-by-Step option of the SDM Site-to-Site VPN wizard instead of the Quick Setup option?
AES encryption is required.
3DES encryption is required.
Pre-shared keys are to be used.
The remote peer is a Cisco router.
The remote peer IP address is unknown..
AES encryption is required.
3DES encryption is required.
Pre-shared keys are to be used.
The remote peer is a Cisco router.
The remote peer IP address is unknown..
19. How many bytes of overhead are added to each IP packet while it is transported through a GRE tunnel?
8
16
24
32.
8
16
24
32.
20. What are two benefits of an SSL VPN? (Choose two.)
It supports all client/server applications.
It supports the same level of cryptographic security as an IPsec VPN.
It has the option of only requiring an SSL-enabled web browser.
The thin client mode functions without requiring any downloads or software.
It is compatible with DMVPNs, Cisco IOS Firewall, IPsec, IPS, Cisco Easy VPN, and NAT..
It supports all client/server applications.
It supports the same level of cryptographic security as an IPsec VPN.
It has the option of only requiring an SSL-enabled web browser.
The thin client mode functions without requiring any downloads or software.
It is compatible with DMVPNs, Cisco IOS Firewall, IPsec, IPS, Cisco Easy VPN, and NAT..
21. Which UDP port must be permitted on any IP interface used to exchange IKE information between security gateways?
400
500
600
700
400
500
600
700
22. A network administrator is planning to implement centralized management of Cisco VPN devices to simplify VPN deployment for remote offices and teleworkers. Which Cisco IOS feature would provide this solution?
Cisco Easy VPN
Cisco VPN Client
Cisco IOS SSL VPN
Dynamic Multipoint VPN
Cisco Easy VPN
Cisco VPN Client
Cisco IOS SSL VPN
Dynamic Multipoint VPN
23. A user launches Cisco VPN Client software to connect remotely to a VPN service. What does the user select before entering the username and password?
the SSL connection type
the IKE negotiation process
the desired preconfigured VPN server site
the Cisco Encryption Technology to be applied
the SSL connection type
the IKE negotiation process
the desired preconfigured VPN server site
the Cisco Encryption Technology to be applied
