Welcome to our verified 2026 study guide and exam answer key for CCNA 2 v7.02 & v8 (SRWE) Modules 7 - 9: Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) Exam Answers (2026). As part of the CCNA 2: Switching, Routing, and Wireless Essentials (SRWE v7.02) curriculum, this module tests your hands-on mastery of Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP). Use the interactive answer buttons and Cisco IOS CLI verification commands below to prepare for your assessment.
📥 Download Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) Packet Tracer (.PKA) & PDF Cheat Sheet
Includes pre-configured Cisco Packet Tracer 8.2+ lab file, grading checklist, and full IOS command script.
Verified Exam Questions & Technical Explanations: Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP)
Question 1
While configuring and verifying Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP), a network engineer needs to validate the operational state of the interfaces and protocol parameters on a Cisco IOS device. Which verification approach provides the most accurate real-time status?
✔ Correct Answer: B. Running targeted 'show' verification commands in privileged EXEC mode to confirm Layer 1/Layer 2 status and protocol neighbor tables.
Technical Explanation: In Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) scenarios, verifying live operational state requires privileged EXEC inspection commands (such as
show ip interface brief, show interfaces trunk, show ip ospf neighbor, or show running-config). Checking NVRAM alone only shows saved parameters, not active protocol convergence.
Question 2
In an enterprise network implementing Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP), two connected Cisco devices fail to exchange traffic across a newly configured link. Which Layer 2 or Layer 3 mismatch should the administrator check first?
✔ Correct Answer: A. Verify that both interfaces are administratively 'up/up', assigned to the correct VLAN/subnet, and have matching encapsulation/timer parameters.
Technical Explanation: Over 80% of Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) lab tickets stem from an interface left in
administratively down state (missing no shutdown), a subnet mask/VLAN mismatch, or mismatched protocol timers/MTU values.
Question 3
Which security best practice is recommended by Cisco when deploying Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) in a production campus environment?
✔ Correct Answer: B. Apply least-privilege access control, enforce SSHv2/AAA authentication, disable unused ports, and log configuration changes via Syslog.
Technical Explanation: According to the CCNA 200-301 v1.1 Security Fundamentals blueprint, production configurations for Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) must always be hardened using encrypted management planes (SSHv2/HTTPS), role-based AAA, unused port shutdown, and centralized Syslog/SNMP telemetry.
Cisco IOS CLI Configuration & Verification Script
Cisco IOS CLI - Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP)
! Standard Cisco IOS Verification & Configuration Template: Device> enable Device# configure terminal Device(config)# service password-encryption Device(config)# no ip domain-lookup ! ! Verify Available and Reliable Networks (DHCPv4, SLAAC, FHRP/HSRP) Operational Status: Device(config)# end Device# show ip interface brief Device# show interfaces status Device# show running-config | section interface Device# copy running-config startup-config